A typical home repair project that can increase your home’s value, exterior appeal, and energy efficiency is replacing your windows. To ensure a correct fit before placing an order for new windows, it’s crucial to measure the current window openings. We’ll outline the procedures for measuring a window for replacement in this post along with advice from a seasoned window installation contractor, Heins Contracting.
Step 1: Measure the width of the window opening
The width of the window aperture must be measured before measuring a window for replacement. Take three measurements of the opening’s width: at the top, center, and bottom. In order to be sure the replacement window will fit properly, note the smallest measurement.
Step 2: Measure the height of the window opening
The height of the window opening should next be measured in the same manner, with measurements being taken at the left, center, and right sides of the aperture. In order to be sure the replacement window will fit properly, note the smallest measurement.
Step 3: Measure the depth of the window opening
The distance between the inner and outside wall surfaces determines the window opening’s depth. This measurement is crucial since it will define the window frame thickness and the kind of mounting hardware required.
Use a tape measure to measure from the internal wall surface to the outside wall surface at the top, middle, and bottom of the opening to determine the depth of the window. Take the smallest measurement possible.
Step 4: Determine the type of replacement window
You can choose the type of replacement window you require after you have your dimensions. To ensure a proper fit, select a window that is either slightly smaller than the old window or the same size as it.
There are numerous varieties of replacement windows available, including:
- Double-hung windows: These windows have two sashes that slide up and down within the frame.
- Casement windows: Using a crank, these windows open outward from the side.
- Sliding windows: These windows have one fixed sash and one sash that slides horizontally within the frame.
- Windows with awnings: A crank opens these windows outward from the bottom.
Step 5: Order your replacement windows
You can order your new windows once you’ve decided what kind of replacement window you require and have your dimensions. We advise hiring a qualified window installer like Heins Contracting to guarantee that you get the right size and style of window for your requirements.
You must select the frame material, glass type, and any other features like grilles or hardware in addition to the window’s size and style. We can assist you in making the best decisions based on your needs for energy efficiency, style preferences, and financial constraints.
With the appropriate equipment and methods, measuring a window for replacement can be a straightforward task. You can be sure your new window will fit properly and offer the energy efficiency and aesthetic benefits you want by measuring the width, height, and depth of the old window opening.Â
You may take advantage of new windows for many years to come if you use the proper supplies, equipment, and methods.
